REDDING COMPETITION SEATING DIE(55XXX) Subtotal:
Dies
Compare
REDDING MASTER HUNTER (MH-C) DIE SET (28XXX)
Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
R0.00
Brand:Redding
Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
Brand
Redding
Related products
-
Dies
REDDING COMPETITION SEATING DIE(55XXX)
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001″ increments for precise seating depth and is infinitely adjustable (without clicks). Also has a “zero set” feature that allows you to zero the micrometer to your rifle or favourite seating depth.
More info Click here
SKU: n/a -
Dies
REDDING TITANIUM CARBIDE DIE SET(88XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!More info Click here
SKU: n/a -
Dies
REDDING COMPETITION BUSHING NECK DIE SET(58XXX)
Competition Bushing Neck Sizing Die
Similar in design concept to Redding’s Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chamberd, sliding sleeve as it moved upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a liner support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. The die was designed for use by Competition Shooters who have meticulously prepared their cartridge cases and do not wish to use a sizing button, however, carbide size button kits are available separately.
Body Die
Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for the use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Competition Seating Die
Redding Competition Bullet Seating Die features a seating stem precision ground to exactly match bullet diameter. No seating die on the market is built to this level of precision. The micrometer is calibrate in .001? increments for precise seating depth and is infinitely adjustable (without clicks). The micrometer also has a setting feature that allows you to set the micrometer to your rifle or favorite seating depth.More info Click here
SKU: n/a -
Dies
REDDING FULL LENGTH SIZING DIE(91XXX)
This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.
This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.
Case lube is essential on these steel dies.
More info Click here
SKU: n/a
