Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
R0.00
Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.
The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001″ increments for precise seating depth and is infinitely adjustable (without clicks). Also has a “zero set” feature that allows you to zero the micrometer to your rifle or favourite seating depth.
More info Click here
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity.
More info Click here
This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.
This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.
Case lube is essential on these steel dies.
More info Click here
MTM RIFLE AMMO CASE W/HANDLE(H50-RM-10)(22-308) 
REDDING FULL LENGTH DIE SET(80XXX) 
REDDING THE CLASSIC MODEL 3 POWDER MEASURE(03000) 
REDDING COMPETITION BUSHING NECK DIE SET(58XXX) 
