Dies
Showing 1–15 of 16 results
-
Dies
REDDING BODY DIE(75XXX)
Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
More info Click here
SKU: n/a -
Dies
REDDING COMPETITION BUSHING NECK DIE SET(58XXX)
Competition Bushing Neck Sizing Die
Similar in design concept to Redding’s Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chamberd, sliding sleeve as it moved upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a liner support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. The die was designed for use by Competition Shooters who have meticulously prepared their cartridge cases and do not wish to use a sizing button, however, carbide size button kits are available separately.
Body Die
Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for the use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Competition Seating Die
Redding Competition Bullet Seating Die features a seating stem precision ground to exactly match bullet diameter. No seating die on the market is built to this level of precision. The micrometer is calibrate in .001? increments for precise seating depth and is infinitely adjustable (without clicks). The micrometer also has a setting feature that allows you to set the micrometer to your rifle or favorite seating depth.More info Click here
SKU: n/a -
Dies
REDDING COMPETITION BUSHING NECK DIE(56XXX)
Competition Neck Bushing Die
The new Competition Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.Uses interchangeable sizing bushings available in .001″ increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
Allows precise control of length of neck sizing.
All dies are supplied without bushings.More info Click here
SKU: n/a -
Dies
REDDING COMPETITION SEATING DIE(55XXX)
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001″ increments for precise seating depth and is infinitely adjustable (without clicks). Also has a “zero set” feature that allows you to zero the micrometer to your rifle or favourite seating depth.
More info Click here
SKU: n/a -
Dies
REDDING FULL LENGTH DIE SET(80XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The standard seating die can also apply a crimp, if required.
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.
Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.
More info Click here
SKU: n/a -
Dies
REDDING FULL LENGTH SIZING DIE(91XXX)
This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.
This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.
Case lube is essential on these steel dies.
More info Click here
SKU: n/a -
Dies
REDDING MASTER HUNTER (MH-C) DIE SET (28XXX)
Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
SKU: n/a -
Dies
REDDING NXGEN CARBIDE DIE SET (88XXX)
The Premium Die Set for Handgun Cartridges consists of a three (3) die set which contains the following; our NxGEN Carbide Sizing Die, a unique Special Expander Die and a Premium Seating Die with our (Std) Bullet Seating Micrometer. All dies have a large entry taper/radius for easy case entry and high production. The unique design of the special expander performs four distinct functions. The smooth entry radius is followed by the correct expanding diameter for proper press fit of the bullets. The upper section of the expanding diameter has a concentric ring which opens the case mouth slightly larger than bullet diameter to enhance bullet alignment. The final taper can provide a “bellmouth” on the case mouth when desired, usually when using lead bullets.
SKU: n/a -
Dies
REDDING TITANIUM CARBIDE DIE SET(88XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!More info Click here
SKU: n/a -
Dies
REDDING TYPE S BUSHING FULL DIE(77XXX)
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity.
More info Click here
SKU: n/a -
Dies
REDDING TYPE S BUSHING NECK DIE SET(78XXX)
Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001? increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Seating Die – The seating die seats and crimps the bullet.More info Click here
SKU: n/a -
Dies
REDDING TYPE S ELITE BUSHING DIE SET
Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.
The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.
SKU: n/a -
Dies
REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX)
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.More info Click here
SKU: n/a
