Redding Neck Sizer Dies size the neck of your bottleneck cases to prolong brass life and improve accuracy.
Case lube is essential on these steel dies.
More info Click here
R0.00
Please click on the link to confirm available calibres – https://redding-reloading.com/
Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001? increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Seating Die – The seating die seats and crimps the bullet.
More info Click here
This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.
This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.
Case lube is essential on these steel dies.
More info Click here
Competition Neck Bushing Die
The new Competition Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001″ increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
Allows precise control of length of neck sizing.
All dies are supplied without bushings.
More info Click here
Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.
The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.
REDDING TITANIUM CARBIDE DIE SET(88XXX) 
REDDING FULL LENGTH SIZING DIE(91XXX) 
REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX) 
REDDING TYPE S ELITE BUSHING DIE SET 
