REDDING COMPETITION BUSHING NECK DIE(56XXX) Subtotal:
Dies
Compare
REDDING NECK SIZING DIE(81XXX)
Redding Neck Sizer Dies size the neck of your bottleneck cases to prolong brass life and improve accuracy.
Case lube is essential on these steel dies.
More info Click here
R0.00
Brand:Redding
Please click on the link to confirm available calibres – https://redding-reloading.com/
Brand
Redding
Related products
-
Dies
REDDING COMPETITION SEATING DIE(55XXX)
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001″ increments for precise seating depth and is infinitely adjustable (without clicks). Also has a “zero set” feature that allows you to zero the micrometer to your rifle or favourite seating depth.
More info Click here
SKU: n/a -
Dies
REDDING TYPE S MATCH BUSHING NECK DIE SET(38XXX)
The Redding Type S Neck Die allows the reloader to precisely control case neck size and tension. Type S Dies use interchangeable sizing bushings that are available in .001″ increments. This set includes Type S Bushing Neck Sizing Die, Body Die and Competition Seater Die. Bushing and Shellholder are sold separately.
More info Click here
SKU: n/a -
Dies
REDDING TITANIUM CARBIDE DIE SET(88XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!More info Click here
SKU: n/a
