REDDING TITANIUM CARBIDE DIE SET(88XXX) 
REDDING COMPETITION SEATING DIE(55XXX) Subtotal:
Dies
Compare
REDDING NECK SIZING DIE(81XXX)
Redding Neck Sizer Dies size the neck of your bottleneck cases to prolong brass life and improve accuracy.
Case lube is essential on these steel dies.
More info Click here
R0.00
Brand:Redding
Please click on the link to confirm available calibres – https://redding-reloading.com/
Brand
Redding
Related products
-
Dies
REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX)
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.More info Click here
SKU: n/a -
Dies
REDDING TYPE S ELITE BUSHING DIE SET
Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.
The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.
SKU: n/a -
Dies
REDDING FULL LENGTH DIE SET(80XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The standard seating die can also apply a crimp, if required.
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.
Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.
More info Click here
SKU: n/a
