REDDING COMPETITION BUSHING NECK DIE(56XXX)

Add to wishlist
Compare

Competition Neck Bushing Die
The new Competition Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.

Uses interchangeable sizing bushings available in .001″ increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
Allows precise control of length of neck sizing.
All dies are supplied without bushings.

More info Click here

R0.00

Add to wishlist
Compare
Brand:Redding

Please click on the link to confirm available calibres – https://redding-reloading.com/

Category:

Brand

Redding

Related products

  • REDDING NECK SIZING DIE(81XXX)

    REDDING NECK SIZING DIE(81XXX)

    Redding
    0 out of 5
    (0)

    Redding Neck Sizer Dies size the neck of your bottleneck cases to prolong brass life and improve accuracy.

    Case lube is essential on these steel dies.

    More info Click here

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING FULL LENGTH DIE SET(80XXX)

    REDDING FULL LENGTH DIE SET(80XXX)

    Redding
    0 out of 5
    (0)

    This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.

    The standard seating die can also apply a crimp, if required.

    These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.

    Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.

    More info Click here

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING NXGEN CARBIDE DIE SET (88XXX)

    REDDING NXGEN CARBIDE DIE SET (88XXX)

    Redding
    0 out of 5
    (0)

    The Premium Die Set for Handgun Cartridges consists of a three (3) die set which contains the following; our NxGEN Carbide Sizing Die, a unique Special Expander Die and a Premium Seating Die with our (Std) Bullet Seating Micrometer. All dies have a large entry taper/radius for easy case entry and high production. The unique design of the special expander performs four distinct functions. The smooth entry radius is followed by the correct expanding diameter for proper press fit of the bullets. The upper section of the expanding diameter has a concentric ring which opens the case mouth slightly larger than bullet diameter to enhance bullet alignment. The final taper can provide a “bellmouth” on the case mouth when desired, usually when using lead bullets.

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TYPE S BUSHING FULL DIE(77XXX)

    REDDING TYPE S BUSHING FULL DIE(77XXX)

    Redding
    0 out of 5
    (0)

    The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity.

    More info Click here

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare