• GUNBRITE POLISH

    0 out of 5
    (0)

    Safe for use on factory blued, stainless steel, chrome and nickel guns. It removes powder fouling, surface rust, tarnish and discoloration from the barrel and stubborn black rings from the face of the cylinder. The polish leaves behind a non-oily protective coating that resists fingerprinting and moisture.

    SKU: n/a
  • IOSSO BORE CLEANER

    0 out of 5
    (0)

    NEW BIO-Based Formula. Highly effective concentrated paste formula that lasts longer and takes less time to clean with than ordinary liquid or aerosol type cleaners. Because it is a paste it cannot spill or run into wood stocks, grips or mechanisms causing chemical damage. Iosso Bore Cleaner removes copper, lead, carbon burn, powder fouling, plastic wad residue, and surface rust. It is non-corrosive, non-flammable and has no offensive odors or mists. Use with the Eliminator Brushes and Eliminator Triple Action Oil Solution for complete cleaning. This bio-based formula is made from plant extracts. While keeping our environment healthy, it also reduces our dependence on foreign resources.

    SKU: n/a
  • IOSSO CASE CLEANER

    0 out of 5
    (0)

    Restores brass casings to a bright finish in seconds. This liquid cleaner effectively removes powder fouling residue, oxidation, tarnish, discoloration, dirt, and grime. It cleans the inside of the casings and the primer pocket where tumbling media is not effective. Just immerse the casings in the solution for 20 seconds up to five minutes, rinse, and dry. The Case Cleaner solution is reusable and economical.

    SKU: n/a
  • IOSSO CASE CLEANER KIT

    0 out of 5
    (0)

    Restores brass casings to a bright finish in seconds. This liquid cleaner effectively removes powder fouling residue, oxidation, tarnish, discoloration, dirt, and grime. It cleans the inside of the casings and the primer pocket where tumbling media is not effective. Just immerse the casings in the solution for 20 seconds up to five minutes, rinse, and dry. The Case Cleaner solution is reusable and economical. A quart of IOSSO case cleaner cleans approximately 1500 casings depending upon the degree of tarnish, residue and size. Case Cleaner is available in quarts and gallons or in a convenient kit. The Kit contains a quart of Case Cleaner, a bucket and strainer bag. Environmentally friendly. Larger sizes are available for commmercial reloaders. The solution may be used in an Ultrasonic Cleaner. It is suggested to line the pan with a plastic bag. The cleaner is meant to clean and brighten brass. It will not enhance the surface like tumbling. For a highly polished finish and protection from tarnish, follow with Iosso Case polish.

    SKU: n/a
  • IOSSO CASE POLISH

    0 out of 5
    (0)

    Iosso Case Polish cleans and polishes brass casings to a high luster. The polish removes powder fouling, residue, oxidation, tarnish, and discoloration. Iosso Case Polish leaves the casings with a highly polished look, and keeps them from tarnishing for a long time. You can also use the polish on casings that have been pre-cleaned with Iosso Case Cleaner.

    Add Iosso Case Polish to the media before tumbling. Add two tablespoons per pound of untreated meda, or one tablespoon per pound of pretreated media and tumble cases for about one hour. Heavily tarnished or dirty cases will need longer tumbling time.

    SKU: n/a
  • IOSSO PRE-TREATED TUMBLING MEDIA

    0 out of 5
    (0)

    This pretreated media mix contains the Iosso Case Polish and corn cobb. The mixture works quickly to remove carbon, powder fouling, oxidation & stains. It shines to a high luster and leaves a protective coating to inhibit future tarnish. It drastically reduces tumbling time. This USDA Certified Bio-Based product has no odor.

    SKU: n/a
  • IOSSO SIZING LUBRICANT AND CLEANER

    0 out of 5
    (0)

    This bio-based product is formulated to clean and lubricate. It eliminates stuck cases to make sizing less work and prolongs the life of your dies. It?s easy to use with no sticky residue and no offensive smell. It is bio-based, water soluble, biodegradable and non-flammable. It inhibits corrosion and rust. Just coat casings well, then size. It cleans while lubricating. Either wipe or rinse in hot water before reloading.

    SKU: n/a
  • IOSSO THE ELIMINATOR BORE BRUSH

    0 out of 5
    (0)

    These premium bore brushes are made with a fiber that is cobalt blue in color so it can’t be mistaken for any other type brush. This thicker, stiffer grade of fiber allows for back and forth action unlike traditional brass and bronze type brushes. They last approximately 8 to 10 times longer than other brushes. The brush is wound tighter and has more fiber per inch than any other brush. Use with the Iosso Bore Cleaner and Triple Action Solution to remove all fouling; copper, lead, plastic wad, and carbon burn. It drastically reduces cleaning time and the result is an unbelievably clean bore. These brushes are available in rifle, pistol, shotgun and black powder sizes. The blue brushes are a Trademark of Iosso Products.

    SKU: n/a
  • IOSSO TRIPPLE ACTION OIL SOLUTION

    0 out of 5
    (0)

    This triple action solution cleans, lubricates and protects. It penetrates to loosen powder, carbon, and plastic wad. It?s is an excellent lubricant for parts, and inhibits corrosion.

    This solution will not freeze or dissipate in hot weather. It lubricates in extreme temperatures to avoid weapon jamming.

    SKU: n/a

Showing all 9 results