MTM BORE GUIDE(BGR-S-40) Subtotal:
Dies
Compare
REDDING NECK SIZING DIE(81XXX)
Redding Neck Sizer Dies size the neck of your bottleneck cases to prolong brass life and improve accuracy.
Case lube is essential on these steel dies.
More info Click here
Brand:Redding
Please click on the link to confirm available calibres – https://redding-reloading.com/
Brand
Redding
Related products
-
Dies
REDDING FULL LENGTH DIE SET(80XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The standard seating die can also apply a crimp, if required.
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.
Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.
More info Click here
SKU: n/a -
Dies
REDDING MASTER HUNTER (MH-C) DIE SET (28XXX)
Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.
SKU: n/a -
Dies
REDDING COMPETITION SEATING DIE(55XXX)
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001″ increments for precise seating depth and is infinitely adjustable (without clicks). Also has a “zero set” feature that allows you to zero the micrometer to your rifle or favourite seating depth.
More info Click here
SKU: n/a -
Dies
REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX)
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.More info Click here
SKU: n/a
