FEDERAL AMMO 308 WIN(150) FUSION /20 Subtotal:
Dies
Compare
REDDING FULL LENGTH SIZING DIE(91XXX)
This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.
This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.
Case lube is essential on these steel dies.
More info Click here
Brand:Redding
Please click on the link to confirm available calibres – https://redding-reloading.com/
Brand
Redding
Related products
-
Dies
REDDING TYPE S BUSHING NECK DIE SET(78XXX)
Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001? increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Seating Die – The seating die seats and crimps the bullet.More info Click here
SKU: n/a -
Dies
REDDING FULL LENGTH DIE SET(80XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The standard seating die can also apply a crimp, if required.
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.
Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.
More info Click here
SKU: n/a -
Dies
REDDING TITANIUM CARBIDE DIE SET(88XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!More info Click here
SKU: n/a
