REDDING FULL LENGTH SIZING DIE(91XXX)

Add to wishlist
Compare

This die allows you to re-size the full length of the cartridge case, while also removing the spent primer. Use with Redding’s Competition Shellholders for ultimate control when bumping the shoulder back.

This die has standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are well suited for progressive reloading.

Case lube is essential on these steel dies.

More info Click here

R0.00

Add to wishlist
Compare
Brand:Redding

Please click on the link to confirm available calibres – https://redding-reloading.com/

Category:

Brand

Redding

Related products

  • REDDING NXGEN CARBIDE DIE SET (88XXX)

    REDDING NXGEN CARBIDE DIE SET (88XXX)

    Redding
    0 out of 5
    (0)

    The Premium Die Set for Handgun Cartridges consists of a three (3) die set which contains the following; our NxGEN Carbide Sizing Die, a unique Special Expander Die and a Premium Seating Die with our (Std) Bullet Seating Micrometer. All dies have a large entry taper/radius for easy case entry and high production. The unique design of the special expander performs four distinct functions. The smooth entry radius is followed by the correct expanding diameter for proper press fit of the bullets. The upper section of the expanding diameter has a concentric ring which opens the case mouth slightly larger than bullet diameter to enhance bullet alignment. The final taper can provide a “bellmouth” on the case mouth when desired, usually when using lead bullets.

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX)

    REDDING TYPE S MATCH BUSHING FULL DIE SET(36XXX)

    Redding
    0 out of 5
    (0)

    Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.

    Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
    The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
    Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
    All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.

    More info Click here

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TITANIUM CARBIDE DIE SET(88XXX)

    REDDING TITANIUM CARBIDE DIE SET(88XXX)

    Redding
    0 out of 5
    (0)

    This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
    The expander die flares the case mouth to accept the bullet.
    The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
    These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
    Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!

    More info Click here

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TYPE S ELITE BUSHING DIE SET

    REDDING TYPE S ELITE BUSHING DIE SET

    Redding
    0 out of 5
    (0)

    Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.

    The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.

    SKU: n/a
    R0.00
    Add To Quote
    Add to wishlist
    Compare