REDDING FULL LENGTH DIE SET(80XXX)

Add to wishlist
Compare

This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.

The standard seating die can also apply a crimp, if required.

These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.

Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.

More info Click here

Add to wishlist
Compare
Brand:Redding

Includes:
Full Length Resizing Die
Seating Die
Please click on the link to confirm available calibres – https://redding-reloading.com/

Category:

Brand

Redding

Related products

  • REDDING NXGEN CARBIDE DIE SET (88XXX)

    REDDING NXGEN CARBIDE DIE SET (88XXX)

    Redding
    0 out of 5
    (0)

    The Premium Die Set for Handgun Cartridges consists of a three (3) die set which contains the following; our NxGEN Carbide Sizing Die, a unique Special Expander Die and a Premium Seating Die with our (Std) Bullet Seating Micrometer. All dies have a large entry taper/radius for easy case entry and high production. The unique design of the special expander performs four distinct functions. The smooth entry radius is followed by the correct expanding diameter for proper press fit of the bullets. The upper section of the expanding diameter has a concentric ring which opens the case mouth slightly larger than bullet diameter to enhance bullet alignment. The final taper can provide a “bellmouth” on the case mouth when desired, usually when using lead bullets.

    SKU: n/a
    Add To Quote
    Add to wishlist
    Compare

  • REDDING MASTER HUNTER (MH-C) DIE SET (28XXX)

    REDDING MASTER HUNTER (MH-C) DIE SET (28XXX)

    Redding
    0 out of 5
    (0)

    Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of hunting. Master Hunter “Deluxe” Die Sets add the option of neck sizing for optimal on-the-range load development. Master Hunter (MH-C) two (2) Die Set – combines a Full Length Sizing Die with a Carbide Size Button and the extraordinary Redding Competition Seating Die.

    SKU: n/a
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TYPE S BUSHING NECK DIE SET(78XXX)

    REDDING TYPE S BUSHING NECK DIE SET(78XXX)

    Redding
    0 out of 5
    (0)

    Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
    Uses interchangeable sizing bushings available in .001? increments.
    The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
    Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
    The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
    A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
    Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
    Seating Die – The seating die seats and crimps the bullet.

    More info Click here

    SKU: n/a
    Add To Quote
    Add to wishlist
    Compare

  • REDDING TYPE S ELITE BUSHING DIE SET

    REDDING TYPE S ELITE BUSHING DIE SET

    Redding
    0 out of 5
    (0)

    Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges.

    The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.

    SKU: n/a
    Add To Quote
    Add to wishlist
    Compare