Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
More info Click here
R0.00
Please click on the link to confirm available calibres – https://redding-reloading.com/
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.
More info Click here
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The standard seating die can also apply a crimp, if required.
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.
Case lube is essential on these steel dies. In general, we recommend using an easy-to-apply, spray-on case lubricant.
More info Click here
Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001? increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Seating Die – The seating die seats and crimps the bullet.
More info Click here
FIOCCHI AMMUNITION 9MM LUGER 93GR EMB 
FIOCCHI AMMUNITION 243 WIN 100GR SP 
REDDING IMPERIAL SIXING DIE WAX(07600) 
REDDING NXGEN CARBIDE DIE SET (88XXX) 
