Reloading Accessories
Showing 61–64 of 64 results
-
Reloading Accessories
REDDING TITANIUM BUSHING(76XXX)
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001″ increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001″ to .002″, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA.
Redding bushings are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort.
Titanium Nitride bushing offer the same features as steel bushings, but also feature titanium nitride to further increase the surface hardness and reduce sizing friction.
More info Click here
SKU: n/a -
Reloading Accessories
REDDING UNIVERSAL DECAPPING DIE KIT(69XXX)
These dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines, single-stage, turret or progressive machines.
Case lube is not required on the universal de-capping dies.
The small die is suitable for 22-cal through 50-cal, with a case length up to 66.5mm/2.625″. An optional decapping rod is available for the small decapping die, for 17-cal cases and for the small 1.5mm/0.060″ flash holes typical of BR and PPC cases. The large die is suitable for 25-cal through 50-cal, with a case length up to 76mm/3.0
More info Click here
SKU: n/a -
Reloading Accessories
REDDING UNIVERSAL DECAPPING DIES(69XXX)
SMALL
This Redding Decapping Die allows you to deprime and clean your cases prior to sizing. Deprimes 22 through 50 caliber cases with lengths up to 2-1/2″.
Technical Information
Material: Steel
NotesDeprimes case only
This die will work for calibers listed with a case length up to 2.5″
Use rod (product number 265948) with this die to deprime 17 to 20 caliber cases
Use large die (product number 193108) for 284 to 50 caliber cases up to 3″ length.
LARGEThis Redding Decapping Die allows you to deprime and clean your cases prior to sizing. Deprimes 284 to 50 caliber cases with lengths up to 3″.
Technical Information
Material: Steel
Notes
Deprimes 284 to 50 caliber cases with a maximum length of 3″
This die will not accept the 17 to 20 caliber rod, and cannot be used with cases under 284 caliberTMore info Click here
SKU: n/a
