Reloading Equipment
Showing 76–90 of 98 results
-
Reloading Accessories
REDDING PRIMER POCKET UNIFORMERS(091XX)
The Redding Primer Pocket Uniformer Tool is designed to cut primer pockets to a uniform depth and square them up with the case head. This helps to increase shot to shot consistency to help create the most accurate ammunition possible.
More info Click here
SKU: n/a -
Reloading Accessories
REDDING RS-6 BENCH STAND(06000)
For convenient bench-top mounting of Redding Powder Measures. Will also fit all other Powder Measures with 7/8-14 thread mounting. This bench stand is not threaded; it is secured with a lock ring which enables you to rotate the measure to any desired position and permits quick dump of the reservoir.
More info Click here
SKU: n/a -
Reloading Accessories
REDDING STEEL BUSHING(73XXX)
By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing.
External dimensions are 1/2″ O.D. x 3/8″ long. They can freely interchange in all Redding Bushing style Neck Sizing Dies.
They are available in .001″ size increments throughout the range of .185″ thru .368″, covering all calibers from .17 to .338 and clearly marked with size I.D.
Heat treated steel. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.More info Click here
SKU: n/a -
Reloading Accessories
REDDING STUCK CASE REMOVAL KIT(22000)
Sooner or later everyone does it. Too little case lubricant (or using ordinary oil) and the case seizes in the resizing die. Usually, the rim pulls off and it is almost impossible to remove the stuck case without damaging the die. This case removal kit provides an easy solution to your problems. Instructions included.
More info Click here
SKU: n/a -
Reloading Accessories
REDDING THE CLASSIC MODEL 3 POWDER MEASURE(03000)
The Redding Model 3 Powder Measure is a great powder measure for any reloader. The micrometer metering chamber is easy to read and located very conveniently in the front of the measure for easy adjustments. The micrometer feature allows reloaders to record their favorite settings for quick reference and set-up when switching between loads. The cast iron from, hand honed fit between the frame and surface drum allows easy metering and cutting of even the most stubborn powders. The included bench-front mounting bracket and see-thru drop tube give the reloader a way to mount the measure to their bench and allow them to see that all of the powder has been dispensed.
More info Click here
SKU: n/a -
Reloading Accessories
REDDING TITANIUM BUSHING(76XXX)
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001″ increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001″ to .002″, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA.
Redding bushings are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort.
Titanium Nitride bushing offer the same features as steel bushings, but also feature titanium nitride to further increase the surface hardness and reduce sizing friction.
More info Click here
SKU: n/a -
Dies
REDDING TITANIUM CARBIDE DIE SET(88XXX)
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
These conventional dies have standard threads (7/8″ x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you’ll feel the significant reduction in force required to operate the press!More info Click here
SKU: n/a -
Dies
REDDING TYPE S BUSHING FULL DIE(77XXX)
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity.
More info Click here
SKU: n/a -
Dies
REDDING TYPE S BUSHING NECK DIE SET(78XXX)
Type S Bushing Neck Sizing Die – The new Type S – Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
Uses interchangeable sizing bushings available in .001? increments.
The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
Concentrically is enhanced by the ability of the resizing bushing to self-center on the case neck.
The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
A decapping pin retainer is also supplied with most Type-S – Bushing Dies except 17 and 20 cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Body Die – Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.
Seating Die – The seating die seats and crimps the bullet.More info Click here
SKU: n/a
