MTM
Showing 1–15 of 33 results
-
-
Reloading Accessories
MTM AMMO BOX TALL(AC30T-11)
MTM Case-Gard?s family of Ammunition Cans has grown to include a second choice in the 30 caliber size. The AC30T, a 30 cal. can intended to replicate the shape of an actual 30 cal. army surplus ammunition can. Both, MTM?s original short 30 cal. can and this new tall design, offer the same capacity as a traditional 30 caliber military ammo can.
SKU: n/a -
Reloading Accessories
MTM AMMO CASE(P-100-22M-29)
Designed for varmint hunters, weekend plinkers and anyone needing to organize their 22 long rifle or HMR ammunition. P-100 series features a scuff-resistant textured surface, snap-lock latch, stacking feet, full length mechanical hinge and unheard of, 25 year guarantee.
SKU: n/a -
Reloading Accessories
MTM AMMO CRATE UTILITY BOX GREEN 4.8IN(ACR4-18)
Designed for ammo storage, although perfect for storing shooting, hunting or survival gear. Ideal for Shotshell storage with it holding 1 flat or 10 boxes of 12 gauge target loads. Two extra strong handles make it easy to carry 65 pounds gear. Designed to be stacked high, using molded-in stacking ridges. Four tie down points for ATV attachment. Utilizing MTM’s tongue and groove O-Ring seal system for a superior water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution to so many storage needs. Made in the USA, with high-impact polypropylene plastic. Can be used as a boaters dry storage box, first aid, safety and RV camper storage container.
SKU: n/a -
Reloading Accessories
MTM AMMO CRATE UTILITY BOX SHORT 5(ACR5-72)
Designed for ammo storage, also perfect for storing shooting, hunting or survival gear. Two extra strong handles make it easy to carry up to 85 pounds of gear. Designed to be stacked high, using molded-in stacking ridges. Four hook points for ATV attachment. MTM’s tongue and groove O-Ring seal system for water-resistant dry storage.
SKU: n/a -
Reloading Accessories
MTM AMMO CRATE UTILITY BOX TALL 8(ACR8-72)
ACR8-72 Ammo Crate Utility Box
Designed for ammo storage, but also perfect for storing shooting, hunting, or survival gear. Two extra strong handles make it easy to carry up to 85 pounds of gear. Designed to be stacked high, using molded-in stacking ridges. Four hook points for ATV attachment. Utilizing MTM’s tongue and groove O-Ring seal system for superior water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution to many storage needs. Made in the USA, with high-impact polypropylene plastic.
SKU: n/a -
Reloading Accessories
MTM BORE GUIDE(BGR-S-40)
MTM Case-Gard is family owned and operated since 1968. MTM strives to be innovative in our approach to the shooting sports. All of our products were either designed by one of our team, as a solution to a problem we encountered, or because you, the Case-Gard user, suggested it. The results are innovative quality products that last! We know because we use them.
SKU: n/a -
Tools
MTM CHAMBER SAFETY FLAGS
Rifle & Pistol Chamber Safety Indicator Flag 8 pack
MTM Chamber Indicator Flags are made of rugged polypropylene right here in the U.S.A. Brightly colored for easy recognition of an empty firearm chamber. Sold as an 8-pack, includes four pistol flags and four rifle flags.
SKU: n/a -
Reloading Accessories
MTM RIFLE AMMO BOX(RM-100-10)
MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract. This box also features are mechanical hinge which is guaranteed for 1 million open-close cycles or 25 years. Snap-Lock latch protects contents from accidental spilling. Each CASE-GARD 100 ammo box is supplied with a load label for recording load data. This style of CASE-GARD 100’s is available in two sizes. All rounds listed bullet up.
SKU: n/a -
Reloading Accessories
MTM RIFLE AMMO BOX(RM-20-10)
Worn on the belt, this CASE-GARD ammo carrier puts twenty rounds at the hunter’s fingertips. Each cartridge fits into its own recess, bullet down for easy removal. Two special ribs protect the bullet from touching the bottom of the case to guard against tip damage (which can change the flight characteristics of a bullet). Not only will your ammo be protected from dust and moisture, but the MTM Snap-Lok latch will prevent accidental openings. The calibers listed below will provide bullet tip protection with very little rattle; however, calibers not listed will fit loosely.
SKU: n/a -
Reloading Accessories
MTM RIFLE AMMO BOX(RM-50-10) FLIP TOP
These are the newer CASE-GARD ammo boxes. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world. Full length mechanical hinge that is guaranteed for 25 years. Snap-Lock latch protects contents from accidental spilling. Textured finish makes it easier to grip and harder to scratch.
In the late 1960’s, the original RS-S-50 was designed specifically for bench rest shooters. The CASE-GARD 50’s, are now available in eight sizes will hold .22 Hornet to 375 Remington Ultra Mag., with each cartridge resting in its own individual compartment. Each CASE-GARD 50 ammo box is supplied with a load label for recording load and sight data. All rounds listed as bullet up, unless noted. See ammo box charts for more calibers.
All MTM Case-Gard ammo boxes are MADE IN USA in our factory in Dayton Ohio.
SKU: n/a -
Reloading Accessories
MTM RIFLE AMMO BOX(RS-100-41)
The CASE-GARD RS-100 is a textured fliptop 100 round small rifle ammunition box. MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract. Each cartridge rest in its own individual compartment. This box also features are mechanical hinge which is guaranteed for 1 million open-close cycles or 25 years. A Snap-Lock latch protects contents from accidentally spilling. Each CASE-GARD 100 ammo box is supplied with a load label for recording load and sight data.
SKU: n/a -
Reloading Accessories
MTM RIFLE AMMO CASE (22-HORN-10) FLIP TOP
MTM Case-Gard is family owned and operated since 1968. MTM strives to be innovative in our approach to the shooting sports. All of our products were either designed by one of our team, as a solution to a problem we encountered, or because you, the Case-Gard user, suggested it. The results are innovative quality products that last! We know because we use them.
SKU: n/a
